This is a heavy duty steering setup that mocks the factory YJ Wrangler setup with easier adjustment & much stronger tubing. The kit can be used with the stock steering position on the knuckle or used with high steer arms. The taper is for standard GM 1 ton TRE's.
The adjustment is easier because we add Hex Head TRE weld bungs so a crescent wrench can be used as your adjustment tool, not a pipe wrench which will scar the tube and the paint.
These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are made for a 1 ton rig and much larger than stock.
You will receive:
- 2x 48" of 1.5" X .25" wall DOM tubing
- 4x 7/8" hex head weld bungs, 2 LH & 2 RH, 18TPI for tie rod ends
- 4x 7/8" jamb nuts, 2 LH & 2 RH, 18TPI for tie rod ends
- 4x tie rod ends, 1 for the Y-Link, 2 for the rie rod, & 1 high angle TRE for the pitman arm
We supply more DOM than you need.