Previous image Next image
Zoom image

Rear Crossmember Reinforcement Kit for Jeep Wrangler YJ/TJ


Score: 3.81. Votes: 21

This is a 3/16" thick steel cross member re-enforcement plate to "cap" the factory rear frame cross member on a Jeep TJ, LJ or YJ.

It is designed to beef-up your existing rear frame member AND rear most body mounts. It can also be used as a hi clearance bumper by itself (as we do on our swing down tire carriers) or a re-enforcement under any rear bumper.

As you can see in the pictures, you remove the rear most body mounts and install the plate then slip them back in place.

FEATURES:

  • Allows you to repair or replace damage rear cross members & body mounts (needed on LJ's).
  • Allows you to beef up the factory 1/8" thick rear frame section.
  • Can be installed under an existing rear bumper.
  • Can be used by itself as a bumper for a better departure angle.
  • Bolt-on design
  • Shipped to you un-painted


This kit includes:

  • (1) Full width laser cut and CNC bent rear plate
  • Frame tie-in kit and all hardware.
  • Optional backing plate (recommended)

 

IMPORTANT NOTES:



  • Requires drilling additional holes in the rear cross member to properly mount it on your Jeep. 
  • Optional internal "backing plate" is recommended.
  • For proper mounting, it requires removing the fuel tank to drill and access center bolts.
  • Will NOT work on CJ's.
  • If this product is being used under a aftermarket rear bumper to beef up or re-inforce the rear cross member, you may have to cut off and re-weld the lower tabs on the rear bumper (if your bumper has these).
  • $179.99
  • Jeep Wrangler Model
Qty:  
  • Weight
    40.0000 lbs
  • SKU
    RBB-1001

This is a 3/16" thick steel cross member re-enforcement plate to "cap" the factory rear frame cross member on a Jeep TJ, LJ or YJ.

It is designed to beef-up your existing rear frame member AND rear most body mounts. It can also be used as a hi clearance bumper by itself (as we do on our swing down tire carriers) or a re-enforcement under any rear bumper.

As you can see in the pictures, you remove the rear most body mounts and install the plate then slip them back in place.

FEATURES:

  • Allows you to repair or replace damage rear cross members & body mounts (needed on LJ's).
  • Allows you to beef up the factory 1/8" thick rear frame section.
  • Can be installed under an existing rear bumper.
  • Can be used by itself as a bumper for a better departure angle.
  • Bolt-on design
  • Shipped to you un-painted


This kit includes:

  • (1) Full width laser cut and CNC bent rear plate
  • Frame tie-in kit and all hardware.
  • Optional backing plate (recommended)

 

IMPORTANT NOTES:



  • Requires drilling additional holes in the rear cross member to properly mount it on your Jeep. 
  • Optional internal "backing plate" is recommended.
  • For proper mounting, it requires removing the fuel tank to drill and access center bolts.
  • Will NOT work on CJ's.
  • If this product is being used under a aftermarket rear bumper to beef up or re-inforce the rear cross member, you may have to cut off and re-weld the lower tabs on the rear bumper (if your bumper has these).
  • Jeep Wrangler Model
    TJ Wrangler ('97-'06), YJ Wrangler ('87-'95)
  • Internal Backing Plate
    Yes, No
Customer reviews
Average rating:

Score: 3.81. Votes: 21
Rating of votes (21)
5
 
 
5 customers
4
 
 
9 customers
3
 
 
5 customers
2
 
 
2 customers
1
 
 
0 customers
 
Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
Customers who viewed this product bought
Drop items here to shop
Product has been added to your cart