- 2 spring under leaf spring plates for 2.5" springs
- 2 perches for 3", 3.25" or 3.5" axle tube and 2.5" wide
- 4 U-bolts 10"x5/8"x3 1/4" and hardware
Our Complete Deaver Spring Under kit has been a great success but some people wanted a more minimalist approach so here you are!
You will have to cut the Ubolts to fit the thickness of the springs you are using to keep the ends within the bottom cradle. These are for an 3.25" diameter axle (Ford 8.8, D60, 9", Etc..).
The bottom "Cradle" brackets are 1.75" deep and can protect the Ubolt threads from the dirt and rocks, just trim the ends after you install them.
They are made 2.5" or 60mm wide in the spring area, only enough to allow a snug fit so if you lose the center pin it won't fall apart on you. We make the perches slightly wider to add stability and fully rest the spring under the perch.
This is a Do It Yourself (DIY) unwelded kit and comes with the pieces to complete 1 axle left and right sides.